Panasonic AG-HPG10P User Manual
Page 55
Saving data
55
Hard drive data display
You can display the hard drive information.
1
Switch to the USB HOST mode.
2
Connect the USB hard drive.
3
Press [MENU].
4
Using [STOP] and [PLAY]and [STILL], select
“HDD” – “EXPLORE”, and press [STILL].
The hard drive information is displayed.
With a TYPE S or P2 STORE hard drive
7
1
2
3
4
5
6
With FAT
1
2
3
4
1. PARTITION
Type of hard drive
2. VENDER
Name of vender
3. MODEL
Hard drive model name
4. SIZE
Total memory size of hard
drive
5. USED
Amount of hard drive
memory used (unit: GB) and
area of P2 card used (unit:
cards)
6. REMAIN
Remaining hard drive
memory (unit: GB)
7.
Partition number
Partition (unit equivalent to
one P2 card) number inside
hard drive
• Using [FF] and [REW], you can switch the display
between the list with the dates/times and the
names of the partitions given by the user.
• While the thumbnail display of the hard drive
is on the screen, press [MENU], and select
“OPERATION” – “CHANGE PARTITION NAME”.
You can now give a name (consisting of up to 20
characters) to the partition.