Panasonic AG-HPG10P User Manual
Page 47
47
Playback
CMPNT/SDI SEL :
This is used to set the format of the D connector output and HD/SD-SDI output signals.
(When SYSTEM
FREQ is set to 59.94
Hz)
AUTO
Signals are output in the format in which they were recorded.
1080i
720p signals are cross-converted to 1080i signals, and output.
480i
480i format signals are output; 720p/1080i signals are down-converted to 480i
and output.
(When SYSTEM
FREQ is set to 50 Hz)
AUTO
Signals are output in the format in which they were recorded.
1080i
720p signals are cross-converted to 1080i signals, and output.
576i
576i format signals are output; 720p/1080i signals are down-converted to 576i
and output.
SDI OUT
ON
SDI signals are output.
OFF
SDI signals are not output.
SDI METADATA
ON
The meta-data is superimposed onto the HD-SDI signals.
OFF
The meta-data is not superimposed onto the HD-SDI signals.
SDI EDH
ON
EDH is superimposed onto the SD-SDI signals.
OFF
EDH is not superimposed onto the SD-SDI signals.
SET UP
This is used to set the setup level for NTSC output during down-conversion.
• This item is not displayed on the menu when SYS TEM FREQ is set to 59.94 Hz.
0%
7.5%A
The HD/SD-SDI output signals comply with the following standards.
HD : SMPTE 292M, 296M, 299M
SD : SD: SMPTE259M-C (480/59.94i), ITU-R BT. 656-4 (576/50i)