Panasonic AG-HPG10P - Manual (Page 78)

78
List of setting menus (continued)
The underlined settings are the factory mode settings.
Item Description of settings
PC MODE This is used to select the connectors and mode to be used for data transfer. (The USB
and 1394 connectors cannot be used at the same time.)
USB DEVICE:
File transfer mode using the USB connector
USB HOST:
In this mode, files are copied on an external hard disk from the P2 card using the
USB connector.
1394 DEVICE:
File transfer mode using the 1394 connector
1394 HOST:
In this mode, files are copied on an external hard disk from the P2 card using the
1394 connector.
BEEP SOUND This is used to set the beep sound to ON or OFF.
ON, OFF
CLOCK SET This is used to set the unit’s internal calendar.
TIME ZONE The time is set in 30-minute increments from 12:00 hours behind GMT to 13:00 hours
ahead of GMT (a setting of 12:45 hours ahead is also available). (Refer to the table
below.)
+9:00
Time
difference
(from GMT)
Region (city)
Time
difference
(from GMT)
Region (city)
00:00 Greenwich – 00:30
– 01:00 Azores – 01:30
– 02:00 Central Atlantic – 02:30
– 03:00 Buenos Aires – 03:30 Newfoundland
– 04:00
Halifax (Nova
Scotia)
– 04:30
– 05:00 New York – 05:30
– 06:00 Chicago – 06:30
– 07:00 Denver – 07:30
– 08:00 Los Angeles – 08:30
– 09:00 Alaska – 09:30 Marquesas Islands
– 10:00 Hawaii – 10:30
– 11:00 Midway Islands – 11:30
– 12:00 Kwajalein Atoll + 11:30 Norfolk Islands
+ 13:00 + 10:30 Lord Howe Island
+ 12:00 New Zealand + 09:30 Darwin Islands
+ 11:00 Solomon Islands + 08:30
+ 10:00 Guam + 07:30
+ 09:00 Tokyo + 06:30 Rangoon
+ 08:00 Beijing + 05:30 Mumbai (Bombay)
+ 07:00 Bangkok + 04:30 Kabul
+ 06:00 Dhaka + 03:30 Teheran
+ 05:00 Islamabad + 02:30
+ 04:00 Abu Dhabi + 01:30
+ 03:00 Moscow + 00:30
+ 02:00 Eastern Europe + 12:45 Chatham Islands
+ 01:00 Central Europe
OTHER FUNCTIONS screen