Pitney Bowes DM1000 - Manual (Page 10)

1
DM1000 Operating Guide
SV60951 Rev. A 1-5
If you use the AC adapter to power the IntelliLink Control Center:
• Use only the AC adapter designed specifically for the IntelliLink
Control Center. Third-party AC adapters may damage the control
center.
• To protect against electrical shock, plug the AC adapter into a
properly grounded wall outlet.
• Do not route the AC adapter cable over sharp edges or trap it
between furniture.
is plugged is free from obstruction.
• Keep loose clothing, neck ties, jewelry, and long hair away from all
moving parts.
• Avoid touching moving parts or materials while the system is in use.
• Before clearing a jam, be sure system mechanisms come to a stop.
• When removing jammed material, avoid using too much force to
prevent minor personal injury and damaging equipment.
• To prevent overheating, do not cover the system vent openings.
• Do not place lighted candles, cigarettes, cigars, and the like, on the
system.
• Do not remove covers. Covers enclose hazardous parts that should
only be accessed by Pitney Bowes Customer Service. Report any
damage of covers to Pitney Bowes.
• If the IntelliLink Control Center™ display does not light, unplug the
system from the wall outlet and call for service.
• Use only Pitney Bowes approved ink, tape strips, and cleaners. Call
our Supply Line. If you need Material Data Safety Sheets on the
supplies for OSHA requirements, contact your local Pitney Bowes
branch.
Safety
Requirements
(Cont.)
NOTE: Your system requires annual cleaning by your local Pitney
Bowes service representative. For continued safe operation, contact
your Pitney Bowes office to schedule this service.