Pitney Bowes DM1000 - Manual (Page 89)

6-4 SV60951 Rev. A
6 Adding Postage
Connecting
Your
Postage
Meter to an
Analog
Phone Line
1 If you need to connect to a phone line not near your machine, you can
remove the IntelliLink Control Center.
How to Remove the IntelliLink Control Center and Connect to an
Analog Phone Line
1. Turn off the power.
2. Pull the blue release lever at
the right of the IntelliLink
Control Center towards you.
3. Slide the control center
forward to remove it.
4. Take the control center to an
analog phone line location.
• Connect the line (26 AWG
or smaller) to the telephone
jack in the back of the
control center.
• Connect the A/C Adapter
(P/N 1C85005) to the back
of the control center and
plug it into an outlet.
5. Add or check your postage
funds as described in
Checking Your Postage By
Phone Account Balance in this
chapter.
6. When you are done,
disconnect the telephone and
AC adapter.
7. Reinstall the control center by
sliding it into the docking
station on top of the mailing
system until you hear it click
into place.
8. Turn the power back on.
Blue Release Lever
Control Center
Slides Forward
AC Adapter
Power Cord
Connection
Analog
Telephone
Line
Connection
Cord
External
Modem
Connection for AC
Adapter
Analog Phone
Line Connection
3