Pitney Bowes DM1000 - Manual (Page 75)

SV60951 Rev. A
5
Mailing System Set Up
5-12
Phone Set Up:
Dialing Prefix If you need to dial a number in order to reach an outside line, use this
option to enter that prefix number.
1. Press the Menu key on the control center. Select Set Up from the
main screen, then select Phone Set Up.
2. Select Dialing Prefix.
3. Use the numeric keypad to enter the number you need to dial to reach
an outside line, for example, 9.
4. Press the Enter key.
Phone Set Up:
PB Phone # Use this option to enter the Pitney Bowes phone number that you use to
add postage to your postage meter.
1. Press the Menu key on the control center. Select Set Up from the
main screen, then select Phone Set Up.
2. Select PB Phone #. This number is supplied by your Pitney Bowes
representative.
3. Use the numeric keypad to enter the phone number you need to dial to
connect to Pitney Bowes to add postage, or select Reset to Factory
Phone Number to change back to the number present when the
system was delivered.
4. Press the Enter key.
8
Setting Up
Postage By
Phone
®
This section describes how to set up
Postage By Phone® on your mailing
system. It also includes advanced phone
setup instructions for modifying individual
phone connection parameters (user ID and
password and server IP address).
To access the Postage By Phone® setup
options, press the Menu key on the
IntelliLink Control Center, select Set Up
from the main screen, and then select
Phone Set Up.
All of the possible options are listed on the
menu at left.
Phone Set Up:
PBP Account # Your Pitney Bowes representative uses this to set up your Postage By
Phone
® account when installing your mailing system. Your account
number is supplied by Pitney Bowes when you order your system.
Do not change this unless you are directed to do so by Pitney Bowes.
PHONE SET UP
• PBP Account #
• Dialing Prefix
• PB Phone #
• Secondary PB #
• Machine Phone #
• Dialing Type
• Modem Sound
• Modem String
• Diagnostics