Pitney Bowes DM1000 - Manual (Page 47)

4-14 SV60951 Rev. A
4 Running Mail
The external scale is optional equipment that can be used with or without
tapes.
How to Use the Attached Scale
1. Press the Mode key.
2. If the Attached Scale mode is not listed, select Weighing Op-
tions.
3. Select Attached Scale. The “Attached Scale Mode” screen
appears.
4. Press the Class key to choose a class if you have not done so. If
more than one carrier is available for the class you select, use the
right arrow key to compare the rates.
5. If necessary, select a special service.
6. Press Enter. Even if you do not choose a special service, you must
press the Enter key to confirm the class.
7. If you want to charge this postage to an account, select Account
and follow the prompts. (For further details, see Selecting/Dese-
lecting an Account to Print Postage.)
8. If necessary, adjust the thickness adjustment knob and the light
mail/postcard selection knob.
9. If printing on a piece of mail, press the Seal key and select your
sealing option.
If printing on a piece of tape, move the tape lever up for wet tape
and down for dry or pressure-sensitive tape.
10. If printing on a piece of mail, remove piece of mail from the scale,
place on feed deck. If you have disabled Auto-Start, you must
press Start to begin the mail run.
To print tape, press the Tape key.
Use the Attached Scale mode if:
• You have a package that cannot go through the machine.
• You want to know the weight of an envelope that you want to
run through the machine.
Mode:
Attached Scale