Dm1000 operating guide – Pitney Bowes DM1000 User Manual
Page 134
9
SV60951 Rev. A
9-13
DM1000 Operating Guide
Replacing the
Wiper Blade
Assembly
How To Replace the Wiper Assembly
1.
Press the Menu Key.
2.
Select Maintenance.
3.
Select Replace Wiper Blade
Assembly.
4.
Lift up the main cover.
5.
Locate the wiper blade assembly in
front of the printhead assembly.
6.
Locate the small black lever behind
and next to the wiper assembly.
7.
Push the lever to the rear to release
the wiper. Slide the assembly to the
left and lift it out.
8.
Remove new wiper blade assembly
from package.
9.
Replace the wiper blade by placing
it directly into the wiper blade slot
with the shaft end to the right. Slide
the wiper blade to the right until it
clicks in place.
10.
Close the main cover.
Wiper Blade Assembly
Push Lever to Rear To Release
Slide Assembly To the Left
and Lift Out
When you replace the printhead, you must also replace the wiper blade
assembly.