Pitney Bowes DM1000 - Manual (Page 70)

SV60951 Rev. A 5-7
DM1000 Operating Guide
5
6
Setting Up a
Lock Code
1. Press the Menu key.
2. Select Set Up, then select Basic Settings.
3. Select Lock Code and two options are displayed:
a.) Lock Code - On/Off
b.) Change Lock Code
If this is the first time you are setting up a lock code, “Off” appears
next to the Lock Code selection.
4. Select Lock Code and enter a four digit code. Press Enter and the
system prompts you to confirm it.
As soon as you confirm the code, “On” appears next to the Lock
Code selection.
5. Press the Clear key or the left arrow to exit and set the lock code.
6. To activate the system lock, press the Lock button on the IntelliLink
Control Center.
Use the Lock Code option to enter a four-digit password to prevent
unauthorized use of your postage meter.