PictureTel LIVE GATEWAY 3.1 - Manual (Page 15)

Removing LiveGateway Boards
.
Electrical current from power, telephone, and signal cables is potentially hazardous. When
installing, moving, or opening your computer, disconnect all signal cables in accordance with
national and local laws. Do not connect or disconnect LiveGateway components when your
computer is on, as you might damage the LiveGateway hardware. To prevent electrostatic
damage to the board, do not disconnect the power cable from the computer.
To remove a LiveGateway board:
1. Stop the LiveGateway application.
2. Delete the LiveGateway board configuration information for each board you are removing.
3. Shutdown and power down the server.
4. Remove the LiveGateway board(s) from your PC.
5.
Start the LiveGateway application. If you have not removed all of the LiveGateway boards from the
server, you can start the LiveGateway application.