PictureTel LIVE GATEWAY 3.1 - Manual (Page 17)

Installing the LiveGateway Software
To install the LiveGateway software:
1. Insert the LiveGateway CD-ROM into the CD drive.
2. Click the Windows NT Start button on your desktop, and choose Run... The Run dialog box is
displayed.
3. Type d:\disk1\setup, and click OK (for CD), where d: represents the drive letter associated
with your CD. The LiveGateway Welcome screen is displayed.
4. Click Next > to proceed with the installation, or click Cancel to stop the installation. If you
proceed, the Choose Destination Path screen is displayed.