Setting on line status – PictureTel LIVE GATEWAY 3.1 User Manual
Page 42
5.
Specify the Gateway Prefix that LiveLAN users and LiveManager will use to direct a
call through a LiveGateway. This number is the same for all LiveGateways on the
network.
6.
Specify the Dialing Prefix which the LiveGateway will use to make an outgoing call.
This prefix is usually defined by the telephone switch/PBX.
7.
If you want every incoming H.320 call to be automatically routed to the operator, check
the "Always Use Operator" check box.
8.
Choose the appropriate item for the Switch Type, Number Plan, and Number Type
fields. Depending on what you specified for the Switch Type, you may need to enter
additional information (Service Provider IDs (SPIDs), Multi-Subscriber numbers
(MSNs), and ISDN Subaddresses.
Note: You obtain BRI configuration information from your telephone company or your site's
telecommunications manager.
Setting On Line Status
To set the LiveGateway Board's status to On Line:
1.
Open the LiveGateway server from the LiveGateway SNMP Manager window.
2.
Select the Gateway Boards tab of the LiveGateway Server window.
3.
Perform one of the following actions:
•
Click on a board in the list to highlight the board, and select Operations-> On
Line... from the LiveGateway Server window's menu bar.
•
Right-click your mouse when it is positioned over the board's entry line and
select "On Line" from the popup menu