PictureTel LIVE GATEWAY 3.1 - Manual (Page 74)

name
0x0002
PictureTel
LiveGateway shut
down in file server:
server name
LiveGateway has shut
down normally (that is, a
user has unloaded
LiveGateway from the
server) or abnormally
(for example, a fatal
error). If a fatal error has
occurred, this message is
preceded by a fatal error
message.
For normal unloading,
no action required. For
abnormal unloading,
refer to the information
about the fatal error
message preceding this
message.
0x0003
Old event log file
was deleted:
filename
LiveGateway deleted the
specified event log.
No action required.
0x0200
POST successful,
but card not
responding. Try
another IRQ
selection.
Auto-detection of IRQ
conflict not functioning
properly.
Choose a different IRQ.
0x0201
Possible
LiveGateway
hardware failure
The LiveGateway card is
not responding to
download commands.
Possible hardware
problem. Verify software disk
integrity and try to
reinstall. If error
reoccurs, contact
PictureTel.
0x0202
File downloaded to
LiveGateway
The file was successfully
downloaded to the
LiveGateway card.
No action required.
0x0300
LiveGateway
hardware setting:
value
Hardware configuration
may conflict. Choose a new I/O or
IRQ setting.
0x0400
LiveGateway
received unregister
command
LiveGateway Console
commanded
LiveGateway to go off-
line.
No action required.
0x0401
LiveGateway
received inactive
command from
SDC
LiveGateway card about
to reset. Self-test button
pressed on LiveGateway,
or LiveGateway service
stopping.
No action required.