PictureTel LIVE GATEWAY 3.1 - Manual (Page 27)

Running the Configuration Utility
You can change information for a LiveGateway board by running the LiveGateway Configuration utility as
follows:
1. Click the Windows NT Start button, and choose Programs -> PictureTel LiveGateway -> LiveGateway
Configuration.
2. Choose the field you want to change.
3. Enter the new information.
4. Click OK. A message is displayed prompting you to restart the LiveGateway service. Changes do not
take effect until you restart the service.
5. Choose Restart Now.
Starting the LiveGateway Application
To start LiveGateway:
1. Click the Windows NT Start button, and choose Settings -> Control Panel.
2. Select the Services group.
3. Select the LiveGateway Service.
4. Click the Start button. (Note: The Start button is available only if LiveGateway is not currently running.)
Stopping the LiveGateway Application
To stop LiveGateway:
1. Click the Windows NT Start button, and choose Settings -> Control Panel.
2. Select the Services group.
3. Select the LiveGateway Service.
4. Select the Stop button. (Note: The Start button is available only if LiveGateway is not currently
running.)
Accessing the LiveGateway Audio Clip Recorder
The LiveGateway Audio Clip Recorder, a stand-alone utility that allows you to record customized versions of
the LiveGateway automated attendant audio messages, is automatically installed when LiveGateway is setup on
your server. Refer to Using PictureTel LiveGateway for information on how to access and use the LiveGateway
Audio Clip Recorder.