PictureTel LIVE GATEWAY 3.1 - Manual (Page 34)

2. Enter the name or address of the LiveGateway server in the text box of the Name/Address
tab.
If you are entering an address, use standard decimal notation format. An example of an IP
server address is 140.242.70.5.
3. Modify the SNMP parameters on the SNMP tab.
The SNMP tab shown here allows you to specify the SNMP parameters that will be used
for accessing the server that is being added.
Initially this tab displays the default SNMP parameters. If it is desirable to change the
default SNMP parameters initially assigned to a server, refer to the "Configuring the
LiveGateway SNMP Manager" section of this document.
4. Click the OK button after you have entered your address/name information and the SNMP
parameters.
If the information that you entered is valid, the Add LiveGateway Server closes and the
LiveGateway SNMP Manager window is updated showing the following information for
the LiveGateway server you entered:
• Name
• Address
• Status