Livegateway documentation, System requirements, Hardware requirements – PictureTel LIVE GATEWAY 3.1 User Manual
Page 5
LiveGateway Documentation
The LiveGateway documentation is provided in two file formats: PDF and HTML. Use the PDF files if you
want to view and/or print the documentation in a traditional book format.
Note
You need the Adobe Acrobat Reader to print/view the PDF files. This
reader is included within the PDF subdirectory of the Docs directory on the
CD-ROM.
The HTML (file extension: htm) files can be viewed from within any standard web browser such as Microsoft's
Internet Explorer or Netscape's Communicator.
System Requirements
This section identifies the minimum system requirements for running LiveGateway on a Windows NT TCP/IP
server. The information is organized into the following categories:
Board configuration information
Hardware Requirements
Before you install LiveGateway, make sure your computer meets the following minimum hardware
requirements:
•
19 MB of available hard disk space
•
ISA (AT) or EISA bus, with one full-length expansion slot available
•
An ISDN BRI line
•
An NT1 network device with a power supply (or a digital Private Branch Exchange (PBX) connection)
•
One of the following processors, depending on how many LiveGateway boards you are installing:
Note Depending on your server's hardware configuration, up to four LiveGateway boards can be installed.
Number of
Boards
Server Requirement
1
66 MHZ 80486 processor with 16 MB of memory (16 MB of virtual memory for the swap
file) (Minimum)
2
90 MHZ Pentium processor with 32 MB of memory (Minimum)