PictureTel LIVE GATEWAY 3.1 - Manual (Page 67)

- IBCHCT = 2
- OBCHCT = 2
- COS = NICND (class of service; no ISDN calling # delivery)
- PIC = XXX-C56 (where XXX is the inter-exchange carrier's code)
- PIC = XXX-C64 (where XXX is the inter-exchange carrier's code)
Terminal Service
Profile Data: - USID = 1 (user ID)
- TSPID = 7085551234001 (for illustration purposes)
- TERMLIM = 1 (maximum number of terminals that can share this
SPID)
- CT = CMD
- FKMPINUM = 0 (feature key management profile index number)
Access Data: - BCHEQN = 2 (number of B-channels assigned)
- BEQN = SP & AU3 & C56 & C64 (bearer capabilities on BRI)
- COE = CLASS1 (class of equipment)
- LINKOPT = DYNNOPL (dynamic link, no packet links)
- CPDDN = 7085551234-CMD - The directory numbers assigned by the
telephone company must match the bearer capabilities requested. In this
example, the single number listed is for circuit mode data. For this
application, two DN's are requested.
- CPVDN2 = 7085551235
* NI1 was first supported in the APS 11 software release.
Note: Some fields might vary from one switch to another. Voice DN might be different from CMD DN.