NEC MAGICOLOR 6110 - Manual (Page 103)

Status, Error, and Service Messages 101
<x> DOOR OPEN The specified cover is
open and must be
closed. Close the cover.
FUSER JAM Media has jammed leav-
ing the fuser area. Locate and remove the
jam.
FUSER MISINSTALLED The fuser is not fully
seated. Make sure the fuser is
fully seated.
FUSER OIL EMPTY The fuser oil bottle for
the fuser is empty. The
printer will not print any
more copies until a new
fuser oil bottle is
installed. Install a new fuser oil
bottle.
FUSER OIL LOW The fuser oil bottle for
the fuser unit is running
low. If you have a new fuser
oil bottle on hand, you
may want to install it
now. If you don’t, order
one now. A limited num-
ber of copies (about
100) will still print. How-
ever, when the oil runs
out, the printer stops and
the
FUSER OIL EMPTY
message appears.
IDLE The printer is on line, but
no jobs are in process. No action needed.
INITIALIZING The printer is warming
up and getting ready to
go on line. Wait. No other action
needed.
INNER JAM Media has jammed leav-
ing the OPC belt car-
tridge area. Locate and remove the
jam.
INPUT BIN JAM Media has jammed while
being pulled from the
specified tray.
This message... means... do this...