NEC MAGICOLOR 6110 - Manual (Page 55)

Maintaining the Printer 53
„
Do not tilt, lubricate, or disassemble the printer.
5"
For best output quality and longest consumables life, keep the
printer on a hard, flat, level (within 1.5°) surface capable of sup-
porting about 119 lbs (53.9 kg). A surface can be tested for level-
ness with a standard round pencil. If the pencil rolls, the surface is
not level.
„
Do not touch the electrical contacts, gears, or laser beam devices. Doing
so may damage the printer and cause the print quality to deteriorate.
„
Keep media in the output tray at minimum level. If the media stacks too
high, your printer may experience media jams, excessive media curl, or
built-up static.
„
Clean any paper dust and toner buildup from the inside of the printer.
Attention
While the cartridges may appear not to be fully inserted, gently
closing the front cover will guide them to their proper operating
position.
5"
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and neutral detergent. If you get toner on your clothes,
lightly dust them off as much as possible. If some toner remains on
your clothes, use cool, not hot water, to rinse the toner off, pro-
vided your clothing is washable.
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter zur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf “Answer Base”).