NEC MAGICOLOR 6110 - Manual (Page 50)

Loading Media 48
3
Click OK.
5"
The duplex unit accessory requires at least one lower feeder
unit installed.
Using Media Other Than Plain Paper
Attention
Although the magicolor 6110 was designed for occasional printing on a
wide range of media types, it is not intended to print exclusively on a
single media type except plain paper. Continuous printing on media
other than plain paper (such as envelopes, glossy stock, labels, thick
stock, or transparencies) may adversely affect print quality or reduce
engine life.
For media other than standard plain paper or transparencies, both the driver
(Paper tab, Paper Type option) and the Media key on the Control Panel need
to be selected to tell the printer that thick stock is loaded. It is important to use
the Media key to set the tray to the appropriate media type in order to obtain
optimum printing results and to enable the toner to adhere better.
Loading and Printing Envelopes
1
In the printer driver (Paper tab, Paper Type option), select Thick Stock.
2
On the control panel, press the Media key to select printing on thick stock,
if necessary.
3
Place the envelopes on a flat surface, and flatten them by pressing down
the corners.
4
Flex the envelope stack (including the edges) to remove any stiffness.
5
Correct any bent corners, and then tap the
envelopes on a flat surface to align them.
6
Remove the upper media tray from
the printer (and remove any media in
the tray).