NEC MAGICOLOR 6110 - Manual (Page 48)

Loading Media 46
4
Load the media face-up with its top
toward the right of the tray and the
long edge toward the printer.
A fill limit mark is provided on the
inside left side of the tray. The stan-
dard upper media tray holds 250
sheets of 20 lb bond (75 g/m²)
paper. The optional lower feeder unit
media tray holds 500 sheets of 20 lb
bond (75 g/m²) paper.
Often, an arrow on the media pack-
age label indicates the printing-side
of the media.
Attention
If necessary, readjust the media guides after inserting the media.
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
5
Slide the media tray back into the printer.
Loading and Printing Letterhead and Memo Media
1
In the printer driver (Paper tab, Paper Type option), select Automatic.
2
Remove the media tray from the printer (and remove any media in
the tray).
3
Load the new
media.
If you are using
the universal tray
and are printing
simplex
(one-side per
sheet) (long-
edge first), l
oad the media
printing-side up
with the top of the media (the letterhead or memo information) on the right
side of the tray. If you’re using the optional letter/A4 tray and are printing
simplex short-edge first, load the media printing-side up with the top of the
media (the letterhead or memo information) toward the back of the tray.
4
Slide the media tray back into the printer.
Universal tray Letter/A4 tray