NEC MAGICOLOR 6110 - Manual (Page 110)

Status, Error, and Service Messages 108
Error messages P1 through P6 apply only to models with the duplex unit
installed.
* HW: Hardware error.
CALL FOR SERVICE
P3 DUP SOLND
An error has been
detected with the item
indicated in the ser-
vice message. Reboot the printer.
This often clears the
service message indi-
cator, and printer oper-
ation can resume. If
the condition persists,
contact your local ven-
dor.
CALL FOR SERVICE
P4 DUP MOTOR
CALL FOR SERVICE
P5 DUP SOLND
CALL FOR SERVICE
P6 OPT FAN ERROR
This service
message... means... do this...