NEC MAGICOLOR 6110 - Manual (Page 108)

Status, Error, and Service Messages 106
CALL FOR SERVICE
C3 NVRAM ERROR
An error has been
detected with the item
indicated in the ser-
vice message. Reboot the printer.
This often clears the
service message indi-
cator, and printer oper-
ation can resume. If
the condition persists,
contact your local ven-
dor.
CALL FOR SERVICE
C4 ENG CTRLR HW*
CALL FOR SERVICE
C7 TIMING CLOCK
CALL FOR SERVICE
D1 Y CLUTCH
CALL FOR SERVICE
D2 M CLUTCH
CALL FOR SERVICE
D3 C CLUTCH
CALL FOR SERVICE
D4 K CLUTCH
CALL FOR SERVICE
D5 YK SOLND
CALL FOR SERVICE
D6 MC SOLND
CALL FOR SERVICE
E1 DEVLPR MOTOR
CALL FOR SERVICE
E2 MAIN MOTOR
CALL FOR SERVICE
E3 DRUM ERROR
CALL FOR SERVICE
E4 TONER SENSOR
CALL FOR SERVICE
E5 ROLLER SOLND
CALL FOR SERVICE
E6 CLEAN SOLND
This service
message... means... do this...