NEC MAGICOLOR 6110 - Manual (Page 106)

Status, Error, and Service Messages 104
WAITING FOR IDLE An active job is in pro-
cess. Access to the
menu is not allowed until
the job is finished. Wait until the print job is
finished and the printer
goes idle.
WARMING UP The printer is warming
up. Wait. No other action
needed.
< X> COVER OPEN The < X> (specified
cover) is open and must
be closed.
Close the cover.
< X> LIFE LOW The < X > (specified item)
is near end of life, such
as the fuser oil roller. If
you have a new fuser oil
roller on hand, you may
want to install it now. If
you don’t, order one
now. A limited number of
copies (about 100) will
still print. However, when
the oil runs out, the
printer stops and the
FUSER OIL EMPTY
message appears.
Replace the specified
item.
< X> TONER EMPTY The <X> (color) toner
cartridge is empty.
Replace the toner car-
tridge.
< X> TONER LOW The < X> (color) toner
cartridge is low. There is
still enough for approxi-
mately 100 letter/A4
pages (at 5% coverage)
before the printer stops.
Redistribute the toner in
the cartridge, or replace
the cartridge.
< X> TONER
MISINSTALLED
The < X> (color) toner
cartridge is not installed
properly.
Remove the toner car-
tridge and reinstall.
This message... means... do this...