NEC MAGICOLOR 6110 - Manual (Page 119)

Dual In-Line Memory Modules (DIMMs) 117
How Much Memory Do You Need?
The amount of RAM installed in your printer governs which resolutions can be
used with each media size. You may also need additional memory to print at
maximum performance.
Minimum System Memory Requirements
You may also need additional memory (DIMMs) for the following:
„
To print complex graphics or complex PostScript documents
„
For increased collation performance
„
For increased spooling performance
Media Size 600x600 1200x1200
Mono 4-
Color
Duplex
Basic/Full
Speed*
Maxi-
mum
*** Mono 4-
Color
Duplex
Basic/Full
Speed*
Maxi-
mum
***
B5 (ISO), B5
(JIS), Exec. 64 64 64/96 64 96 160/288
Letter, A4 64 64 64/96 96 64 96 160/384 384
Legal 64 64 64/64 64 64 128 192/192 384
B4 64 64 96/96 64 128 192/192
Ledger, A3 64 64 96/96 64 160 288/288
12"x18"
13"x18" 64 64 N/A*** 64 192 N/A***
13"x19" 64 64 128/128 64 192 384/384
Notes * “Basic” memory requirement is the minimum memory
required to print at the indicated resolution. “Full speed”
mode for letter/A4 and smaller sizes refers to the ability to
put either 1 or 2 images on one pass of the OPC belt. You
get the fastest speed when you run 2-up (automatically
controlled by the printer), and you need more memory to
support this.
**“Maximum Performance” memory requirement is the min-
imum memory required to achieve the maximum perfor-
mance possible for any given job. The page rate, with
maximum listed memory, will be determined solely by the
complexity of the job.
***N/A = Not applicable. These two sizes cannot be autodu-
plexed.