NEC MAGICOLOR 6110 - Manual (Page 130)

Emulations, Fonts, and Other Software 128
The emulation should be listed in the Options section of the printer’s star-
tup page, in the Administration/Emulation printer’s configuration menu,
and on the advanced status page.
5"
You may want to erase any installation files left on your computer
(and/or workstation), and then remove any temporary directories.
Using an Optional Emulation
Refer to the documentation that came with your emulation for configuration
and usage instructions.
ImageServer
MINOLTA-QMS ImageServer technology provides a high-performance,
cost-effective way for businesses using document imaging to print their
stored image files. For complete information, refer to the documentation that
comes with the ImageServer option.
TIFF, CALS
A CCITT emulation (Group 4, monochrome only) is available through the
MINOLTA-QMS ImageServer option, which image-enables your printer,
allowing it to print many images at or near the rated engine speed and elimi-
nating the need for a computer dedicated to rasterizing images. For complete
information, refer to the documentation that comes with the ImageServer
option.
LN03 Plus
An LN03 Plus emulation offers all of the features on an LN03 Plus laser
printer, including DECTEK emualtion and Digital’s Tektronix 4014 emulation.
If you already have files containing LN03 Plus escape sequences, or if you
have set our application to print to an LN03 Plus printer, you only need to fol-
low its installation instructions to begin using the emulation in your
MINOLTA-QMS printer.
„
Host software compatibility—Since LN03 Plus runs under VMS, VMS
compatibility is important. the MINOLTA-QMS VMS DECnet host software
2.x is compatible with version 3.x MINOLTA-QMS daughterboard soft-
ware.
„
Printer compatibility—This LN03 Plus emulation can be installed only
on MINOLTA-QMS printers that contain a hard disk drive (either internal
or external).