NEC MAGICOLOR 6110 - Manual (Page 52)

Loading Media 50
4
Load the new media.
5"
If your label stock has a top-of-page, place the top-of-page toward
the right side of the tray.
5
Slide the upper media tray back into the printer.
6
In the Operator Control/Media/For Upper Bin menu, select Thick Stock.
Loading and Printing Transparencies
1
In the printer driver (Paper tab, Paper Type option), select Automatic.
5"
The printer automatically senses that transparencies are present.
2
On the control panel, press the Media key to select printing on automatic,
if necessary.
3
Remove the upper media tray from the printer (and remove any media in
the tray).
Attention
Do not leave paper in the tray, or the printer will not automatically
sense that transparencies are present.
4
Load the new media.
5
Slide the upper media tray back into the printer.
Print Media and Your Warranty
Use of of nonsupported print media may cause damage to your printer and
void your warranty. If MINOLTA-QMS printer failure or damage is found to be
directly attributable to the use of non-MINOLTA-QMS print media,
MINOLTA-QMS will not repair the printer free of charge. In this case,
standard time and material charges will be applied to service your printer
for that particular failure or damage.
Where can I get more information?
Check with our web site www.minolta-qms.com for a list of current approved
media. See the Service & Support Guide for a complete listing of support
numbers.