NEC MAGICOLOR 6110 - Manual (Page 128)

Emulations, Fonts, and Other Software 126
Emulations, Fonts, and Other Software
Emulations
Optional emulations, such as ImageServer, LN03 Plus, and CGM are avail-
able. This section describes how to download an emulation to the printer’s
hard disk.
5"
You must have at least one hard disk, internal or external, attached to
the printer in order to use an optional emulation. If more than one hard
disk is available, the emulation automatically installs itself on the disk
with the most free storage space. MINOLTA-QMS recommends that
you have at least 4 MB of memory above the base configuration and
that you add at least 1 MB memory for each emulation installed. This
ensures that the printer can run the emulation without slowing down
performance.
Downloading an Emulation via PageScope
We recommend that you use PageScope to download an emulation. Refer to
the PageScope online help for instructions.
CrownView
Many of the configuration choices that can be made at the control panel can
also be made via CrownView. See the MINOLTA-QMS CrownView online
help for information.
Downloading an Emulation via a Parallel Interface
1
Turn on the printer, and wait for IDLE to display in the message window.
2
If your PC is running Windows, change to DOS.
3
Insert the emulation CD-ROM or disk in your PC, and change to that drive
(for example, if you’re using the D drive, type
d:
↵
).
4
Send the emulation to the printer’s hard disk. Type
copy filename 1pt#
↵
where filename is the name of the installation file and where # is 1 to 3,
depending on the parallel port your printer is connected to (usually 1).
5
When downloading is complete and the printer returns to the idle status,
reboot the printer.