Roland SOLJET SC-500 - Manual (Page 17)

15
What to Do upon Opening the Carton
Use only with a power supply of the
same rating as indicated on the unit.
Use with any other power supply may lead
to fire or electrocution.
Ground the unit with the ground
wire.
Failure to do so may result in risk of
electrical shock in the even of a mechanical
problem
Before connecting the cable, make sure the computer's power and the main power switch of the unit are
switched off.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
Arrange the power cord and interface connection cable to prevent tripping when moving around the unit.
NOTICE
Power connector
Power outlet
Power cord
* Cables are available separately. One which you are sure matches the model of computer being used should be selected.
For IBM PC or PC compatibles
Parallel connector
Secure the cable in place with the clips.
Parallel interface cable (Printer cable)
Parallel connector
Connection
Rear View
Power Connector
Parallel Connector
Use only with the power cord
included with this product.
Use with other than the included power cord
may lead to fire or electrocution.