Roland SOLJET SC-500 - Manual (Page 75)

73
User's Reference
Acceptable material widths
: Grit roller
: Pinch roller (left) : Pinch roller (right)
: Pinch roller (middle)
Make sure the left and right pinch rollers
are positioned above the grit rollers.
131 to 1371 mm (5-3/16 to 54 in.)
* However, when loading material with a width of 131 to 430 mm (5-3/16 to 17 in.), set the [EDGE SENSE] menu
item to [DISABLE].
Approx. 1190 mm (46-7/8 in.)
Material with
a width
960 and 1140 mm
(37-13/16 and 44-7/8 in.)
Material with
a width
742 and 922 mm
(29-3/16 and 36-5/16 in.)
Material with
a width
430 and 610 mm
(16-15/16 and 24 in.)
Approx. 1140 mm (44-7/8 in.)
Approx. 922 mm (36-5/16 in.)
Approx. 742 mm (29-3/16 in.)
(*1) (*2)
Material
Approx. 430 mm (16-15/16 in.)
Approx. 1371 mm (54 in.)
Material with
a width
1190 and 1371 mm
(46-7/8 and 54 in.)
180 mm
(7-1/16 in.)
Approx. 610 mm (24 in.)
Approx. 960 mm (37-13/16 in.)
* Set the middle pinch rollers at any of these
as required.