Roland SOLJET SC-500 - Manual (Page 60)

58
User's Reference
6
Use the [ ] key to choose [FEED ADJUST] or
[SCAN ADJUST]. 7 Press the [ ] key to make the following screen
appear on the display.
8 Enter the correction value read in step 5.
Select the correction value with the [ ] [ ] key,
and press the [ENTER] key.
Repeat steps 6 through 8 and perform [FEED
ADJUST] or [SCAN ADJUST].
PRINT-CUT ADJ.
FEED ADJUST
FEED ADJUST
0.2 mm 0.2 mm