Roland SOLJET SC-500 - Manual (Page 23)

21
Part Names
NOTICE If you will leave the printing head being uncapped for a long time (for example, open the front cover while
printing is made on the middle of platen), printing heads may get clogging and, in some case it results unrecov-
erable damage to the printing head.
When the printing carriage is stopped on the platen, press the [POWER] key to reset the power. The carriage
moves and the printing head is capped.
Front View
Sheet Loading Lever
Front cover
If the cover is opened while the printing or
cutting, it will execute an emergency stop.
Operation panel
Ink cartridge ports
Drain bottle
Do not touch the rail or place the hands
inside the right-hand cover except when
adjusting the height of the printing head.
Touching the area shown may cause the
fingers to be soiled by grease or ink, and
may result in diminished image quality.
Do not put hands inside
Part Names
Rail