Roland SOLJET SC-500 - Manual (Page 96)

94
Specifications
SC-500
Piezo ink-jet method/media-moving method
1346.2 mm x 24998 mm (53 in. x 984-1/8 in.)
131 to 1371 mm (5-3/16 to 54 in.)
(Note that detection of the front and rear edges is not possible for material measuring from 131 mm to 430 mm (5-3/16 to 17 in.).)
131 to 1371 mm (5-3/16 to 54 in.)
(Note that detection of the front and rear edges is not possible for material measuring from131 mm to 430 mm (5-3/16 to 17 in.).)
131 to 1371 mm (5-3/16 to 54 in.)
Cuttable material thickness: 0.08 to 0.22 mm (0.00315 to 0.00866 in.) (depending on material composition)
Maximum cuttable material thickness including base paper: 0.4 mm (0.0157 in.)
Maximum printable material thickness including base paper: 1.0 mm (0.039 in.) (when head is raised to maximum)
Maximum diameter for roll material: 180 mm (7-1/16 in.)
Core inner diameter for roll material: 50.8 mm (2 in.) or 76.2 mm (3 in.)
Maximum weight for roll material: 20 kg (44.1 lb.)
Exclusive SOL INK cartridge
220 cc
±
5 cc
Six colors: cyan, magenta, yellow, black, light cyan and light magenta
16.7 million colors
1440 dpi x 720 dpi / 720 dpi x 720 dpi / 540 dpi x 540 dpi / 360 dpi x 720 dpi / 180 dpi x 720 dpi
Error of less than
±
0.3% of distance traveled, or 0.3 mm, whichever is greater
(at Roland PET-film, print travel: 1 m (39-3/8 in.)
Cutter (blade and blade holder): Special blade for CAMM-1 series
10 to 600 mm/s (10 to 300 mm/s in the material-feed direction)
30 to 200 gf
0.000 to 1.500 mm (0 to 0.0591 in.)
0.025 mm/step (0.00984 in./step)
Error of less than
±
0.4% of distance traveled, or 0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made):
Error of less than
±
0.2% of distance traveled, or 0.1 mm, whichever is greater
0.1 mm or less (excluding stretching/contraction of the material)
Range for assured repetition accuracy (*)
For materials with a width exceeding 610 mm (24 in.): Length 4,000 mm (157-7/16 in.)
For materials with a width of 610 mm (24 in.) or less : Length 8,000 mm (315-15/16 in.)
±
0.5 mm (
±
0.0197 in.) max. at 25
°
C
(excluding possible shift caused by expansion/contraction of the material and/or by reloading the material,
and provided that material length is under 3000 mm (118-1/16 in.)
Automatic cleaning and manual cleaning
Bidirectional parallel interface (compliant with IEEE 1284: nibble mode)
RD-GL III (Cutting), RD-RTL (Printing), RD-PJL
Auto-sleep
Maximum: 1.0A/100V to 240V
±
10% 50/60 Hz
Maximum: 0.4A/100V to 240V
±
10% 50/60 Hz
64dB (A) or less (According to ISO7779)
40dB (A) or less (According to ISO7779)
Printing/Cutting method
Printing/Cutting area
Acceptable
material widths
Width of material that can be cut off
Conditions for usable materials
Ink
cartridges
Apparent colors
Printing resolution (Printing dot resolution)
Distance accuracy (When printing)
Acceptable tool
Cutting speed
Blade force
Blade offset compensation
Software resolution (When cutting)
Distance accuracy (When cutting)
Repetition accuracy (When cutting)
Repetition between printing and cutting
Printing heads cleaning
Interface
Instruction system
Power-saving function
Power
consumption
Acoustic
noise level
Specifications
Sheet material
Roll material
Continued on the next page
For items indicates by an asterisk "(*)", please see the next page.
Type
Capacity
Color
Printing/Cutting mode
Standby mode
Printing/Cutting mode
Standby mode