Roland SOLJET SC-500 - Manual (Page 67)

65
User's Reference
Bidirectional Correction
* Only when the printing direction at the [PRINT MODE] menu has been set to [BI-DIRECTION] (bidirectional)
This adjusts slippage when performing bidirectional printing.
Make this adjustment when you have replaced the material with a different type or adjusted the head height.
Press the [MENU] key and [ ] key to make the
following screen appear on the display.
1 Press the [ ] key to make the following screen
appear on the display.
2
Press the [ENTER] key to start printing a test pattern. 3 Check the test pattern and choose a value with no
displacement. 4
MENU
BIDIRECTION
BIDIRECTION
TEST PRINT
+15 +14 +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15
Test pattern
Value with no displacement
Current setting
Press the [ ] key to make the following screen
appear on the display.
5 Press the [ ] key to make the following screen
appear on the display.
6
Use the [ ] and [ ] keys to set the value you
checked in step 4, then press the [ENTER] key.
7
BIDIRECTION
ADJUST ADJUST
+0 +0
-15 to +15 (In steps of 1)
ADJUST
+0 +5