Roland SOLJET SC-500 - Manual (Page 85)

83
Description of Menu Items
For details about each of the menus, see the "Description of Display Menus."
* Selecting the language
for screen messages
Display Menus Flowchart
Load the material and press
key
When the power is turned
on for the first time, or turned
on after removing the ink
Roland SC-500
Ver.*.**
SETUP SHEET
ROLL EDGE PIECE
Roland SC-500
SOL CMYKLcLm
MENU LANGUAGE
ENGLISH
MENU LANGUAGE
JAPANESE
SETUP SHEET
ROLL
If [EDGE SENSE] is [DISABLE].
PRESS SETUP KEY
Printing/cutting area of the
loaded material (length).
*This is not displayed
when [ROLL] or [EDGE]
has been selected.
Printing/cutting area
of the loaded material
(width).
W1000mm L1230mm
FINE BI-DIR
The settings for [PRINT MODE] (Print Direction)
display only in the case of [BI-DIRECTION].
NOW PROCESSING..
Settings for [PRINT MODE] (Print Mode)
PHOTO/SUPER/FINE/FINE2/NORMAL/FAST/DRAFT
Top
menu
Press the
Press the [ENTER] key
to enable the setting.
Use or to select.
NOW HEAD WASH...
Roland SC-500
UNKNOWN INK TYPE
SET CL-LIQUID
[KCMcmY]
INSTALL
DRAIN BOTTLE SELECT INK TYPE
SOL CMYKLcLm
SET CARTRIDGE
[KCMcmY]
NOW FILLING INK
DISCARD
DRAIN INK
the key
Press the [ENTER] key
to enable the setting.
Use or to select.
+