Runco DTV-1200 - Manual (Page 23)

21
START UP OF THE ADJUSTMENT MODE
Start Up
All picture adjustments are made while in the 'Adjustment mode'.
Press the ADJUST key.
The projector displays the 'Main menu' (menu 1).
menu 1
You are now in the 'Adjustment mode'. The cursor keys are used to make menu selections and also vertical and
horizontal adjustments. The ENTER and EXIT keys are used to move forward and backward through the menu
structure. The ADJUST key can be used to terminate the adjustment mode while a path selection menu (head
menu) is displayed.
Possible Paths
Depending on the projector configuration the following paths are possible with the 'Main menu'.
Image Control - Allows you to change the color temperature of the image and to select another format (adjust-
ment) for the image.
Eye-Q Control - This control allows to align the projector automatically using the autoconvergence unit EYE-Q
built into the projector.
Function Keys - Gives an overview of the programmed function for each key.
Service Menus - Installation and adjustment menus to set up the projector. Before entering a warning will be
displayed.
Adjustment Mode
MAIN MENU
Image Control
Eye-Q
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return