Runco DTV-1200 - Manual (Page 38)

PICTURE TUNING
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
PEAKING
CLAMP TUNING: normal
Select with or
then <ENTER>
<EXIT> to return
36
Cut Off Adjustment
1. Push the cursor key or to select 'Custom Red & Blue Cut off' (menu 3).
2. Press ENTER to activate the adjustment.
3. Push the cursor key or to adjust the red cut-off
4. Push the cursor key or to adjust the blue cut-off.
5. Press ENTER to return to the Color Balance menu.
6. Push the cursor key or to select 'Custom Green cut off' (menu 4).
7. Press ENTER to activate the adjustment.
8. Push the cursor key or to adjust the green cut-off.
9. Press ENTER to return to the Color Balance menu.
When the color balance is adjusted, press EXIT to return.
COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM RED & BLUE GAIN
CUSTOM GREEN GAIN
CUSTOM RED & BLUE CUT OFF
CUSTOM GREEN CUT OFF
Select with arrow keys
the <ENTER>
Red & Blue:
adjust Red with or
Blue with or
<EXIT> to return
menu 1
COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM RED & BLUE GAIN
CUSTOM GREEN GAIN
CUSTOM RED & BLUE CUT OFF
CUSTOM GREEN CUT OFF
Select with arrow keys
the <ENTER>
Red & Blue:
adjust Red with or
Blue with or
<EXIT> to return
menu 2
COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM RED & BLUE GAIN
CUSTOM GREEN GAIN
CUSTOM RED & BLUE CUT OFF
CUSTOM GREEN CUT OFF
Select with arrow keys
the <ENTER>
Red & Blue:
adjust Red with or
Blue with or
<EXIT> to return
menu 3
COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM RED & BLUE GAIN
CUSTOM GREEN GAIN
CUSTOM RED & BLUE CUT OFF
CUSTOM GREEN CUT OFF
Select with arrow keys
the <ENTER>
Red & Blue:
adjust Red with or
Blue with or
<EXIT> to return
menu 4
Sync Fast/Slow Adjustments
What can be done?
The sync function is used to minimize horizontal jittering or tearing at the top to the displayed image.
The sync slow/fast function is only available for RGB sources.
How to setup the sync function?
To change the Sync setting, perform the following:
1. Push the cursor keys or to select Sync (menu 1)
2. Press ENTER to toggle between FAST and SLOW.
Note: SYNC is normally used in the SLOW position. The FAST position is used to compensate for unsteady sync pulses
from older video playback equipment such as VCRs.
menu 1