Runco DTV-1200 - Manual (Page 72)

SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
VOLTAGE DIAGNOSTICS
PROJECTOR DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return
70
Common Settings
What can be done?
Within the common settings menu, the following items can be set up or executed:
- Dynamic Astigmatism
- Gamma Correction
- CRT run in cycle
- CRT Drive mode
- Memory banks : on/off
- Flyback turnover point
- Menu Position : standard/middle
How to select?
1. Push the cursor key or to highlight 'Common Settings' (menu 1).
2. Press ENTER to select. The common settings menu will be displayed (menu 2)
menu 1
COMMON SETTINGS
DYNAMIC ASTIGMATISM
GAMMA CORRECTIONS
CRT RUN IN CYCLE
CRT DRIVE MODE
MEMORYBANKS : ON
FLYBACK TURNOVER POINT
MENU POSITION : STANDARD
Select with or
then <ENTER>
<EXIT> to return
menu 2
Dynamic Astigmatism
What can be done?
The spot shape adjustments correct the spot shape in 25 different areas on the screen for the three colors
separately. The spot shape is adjusted according to the axial axises and the diagonal axises when using the
cursor keys on the Remote. These adjustments have to be done on a dot pattern (external source or genlocked
pattern).
Spot shapes
before dynamic
astigmatism correction
Diagonal
astigmatism correction
(use the and
arrow key)
Axial
astigmatism correction
(use the and
arrow key)
Spot shapes
after dynamic
astigmatism correction