Runco DTV-1200 - Manual (Page 49)

GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with or
then <ENTER>
<EXIT> to return
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with or
then <ENTER>
<EXIT> to return
47
What can be done?
To adjust the vertical picture size.
Start up
1. Push the cursor key or to highlight 'V Size' (menu 1).
2. Press ENTER to activate (menu 2).
3. Push the cursor key or until the correct image height is obtained. (image 1).
Note:
- If the internal # pattern was selected, this pattern remains on the screen.
- If the genlocked pattern was selected, the external source will be displayed.
A bar scale and a numeric indicator help to gauge the size adjustment.
Vertical Size Adjustments
menu 1
Blanking Adjustments
What can be done?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on
to the screen and to hide or black out unwanted information (or noise). A 0% on the bar scale indicates no
blanking. The following blanking adjustment are available: Top, Bottom, left and right blanking.
Start Up
To start up the Blanking adjustments, follow the next procedure :
1. Push the cursor key or to highlight Blanking (menu 1).
2. Press ENTER to display the blanking menu (menu 2).
- If the internal # pattern was selected, this pattern remains on the screen.
- If the genlocked pattern was selected, the external source will be displayed.
menu 1
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return
menu 2