Runco DTV-1200 - Manual (Page 43)

41
How to enter an alignment?
To enter an alignment:
1. Push the cursor key or to highlight a function
2. Press ENTER to activate this function.
3. Press EXIT to return.
LEFT-RIGHT
V CENTERLINE BOW
V CENTERLINE SKEW
SIDE BOW
SIDE KEYSTONE
SEAGULL CORRECTION
Select with or
then <ENTER>
<EXIT> to return
menu 2
Warning
Use this correction to adjust the right side of the image.
Corrects for curvature of the vertical lines
in the middle of the image.
Corrects for tilting of the vertical lines
in the middle of the image.
Corrects for curvature of the
vertical lines on the right side.
Corrects for keystone geometry of the
vertical lines on the right side.
Correct by pushing the
cursor keys to the right. Correct by pushing the
cursor keys to the left.