Runco DTV-1200 - Manual (Page 69)

SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
UNDO DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
UNDO N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
67
Undo North-South Settings to Midposition
What can be done?
'Undo N-S to midposition' is displayed in the Set Midposition menu instead of
'N-S to midposition' when the latter is pressed. The settings for the N-S can be
returned to previous installed settings as long the projector is playing on the
same source ( = same adjustment block).
How to Undo the N-S to midposition?
1. Push the cursor key or to highlight 'Undo N-S to midposition' (menu 1).
2. Press ENTER undo.
menu 1
Digital Vertical Linearity to Midposition
What can be done?
The digital vertical linearity settings for the different areas can be set to their midposition.
How to set the Digital Vertical Linearity to Midposition?
1. Push the cursor key or to highlight 'Dig Vert Linearity mid' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the Digital Vertical Linearity to their mid
position.
menu 1
DIG VERT LINEARITY
TO MIDPOSITION
Dig Vert Linearity settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
What can be done?
'Undo digital vertical linearity to midposition' is displayed in the Set Midposition
menu instead of 'Dig Vert Linearity to midposition' when this latter is pressed.
The settings for the dig vert linearity can be returned to previous installed set-
tings as long the projector is playing on the same source ( = same adjustment
block).
How to undo the digital vertical linearity to midposition?
1. Push the cursor key or to highlight 'Undo Dig Vert Linearity to midposi-
tion' (menu 1).
2. Press ENTER undo.
Undo Digital Vertical Linearity to Midposition
menu 1