Runco DTV-1200 - Manual (Page 68)

SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
UNDO E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
66
East-West to Midposition
What can be done?
The east-west settings can be set to midposition.
How to set the E-W settings to midposition?
1. Push the cursor key or to highlight 'E-W to midposition' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the E-W settings to their midposition.
menu 1
E-W TO MIDPOSITION
E-W settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
Undo East-West to Midposition
What can be done?
'Undo East-West to midposition' is displayed in the Set Midposition menu
instead of 'E-W to midposition' when this latter is pressed. The settings for
the E-W can be returned to previous installed settings as long the projector
is playing on the same source ( = same adjustment block).
How to Undo the E-W to midposition?
1. Push the cursor key or to highlight 'Undo E-W to midposition'
(menu 1).
2. Press ENTER undo.
menu 1
North-South Settings to Midposition
What can be done?
The north-south settings can be set to midposition.
How to set the N-S settings to midposition?
1. Push the cursor key or to highlight 'N-S to midposition' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the N-S settings to their midposition.
menu 1
N-S TO MIDPOSITION
North - South settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2