Set to midposition, R & b covergence mid – Runco DTV-1200 User Manual
Page 65
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then <ENTER>
<EXIT> to return
63
Set to Midposition
What can be done?
All adjustment settings (geometry and convergence) can be set to mid position.
Item is password protected.
How to Start Up?
1. Push the cursor key or to highlight 'Set to Midposition' (menu 1).
2. Press ENTER to display the set to midposition menu (menu 2).
menu 1
DELETE ALL BLOCKS
All blocks
will be deleted!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
menu 1
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
menu 2
R & B Covergence Mid
What can be done?
All convergence settings for red and blue are set to midposition.
Item is password protected
How to set convergence to midposition:
1. Push the cursor key or to highlight 'R & B Convergence Mid' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm.