Undo green convergence mid, Focus to midposition, Undo focus to midposition – Runco DTV-1200 User Manual
Page 67
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
UNDO FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
UNDO GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
65
Undo Green Convergence Mid
What can be done?
'Undo Green convergence mid' is displayed in the Set Midposition menu
instead of 'Green convergence mid' when the latter is pressed. Only available
when the projector is equipped with green convergence adjustmentes.
How to undo?
1. Push the cursor key or to highlight 'Undo Green Convergence Mid'
(menu 1).
2. Press ENTER undo.
menu 1
Focus to Midposition
What can be done?
The focus settings can be set to midposition.
How to set the Focus settings to midposition?
1. Push the cursor key or to highlight 'Focus to Midposition' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the procedure to set the focus settings to their midposition.
menu 1
FOCUS TO MIDPOSITION
Focus settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
Undo Focus to Midposition
What can be done?
'Undo Focus to Midposition' is displayed in the Set Midposition menu instead
of 'Focus to midposition' when the latter is pressed. As long the projector is
running on the same source (= same adjustment block), undo the focus to
midposition is possible.
How to undo the Focus to midposition?
1. Push the cursor key or to highlight 'Undo Focus to Midposition'
(menu 1).
2. Press ENTER undo.
menu 1