Runco DTV-1200 - Manual (Page 29)

27
How to start up the EYE-Q Touch Up?
1 Push the cursor keys or to select 'EYE-Q Touch Up' (menu 1).
2 Press ENTER to activate the touch up function.
The process starts and when successfully completed, the projector will return to image display of the
current source.
menu 1
EYE-Q CONTROL
EYE-Q Touch Up
EYE-Q Auto Converge
Select with or
then <ENTER>
<EXIT> to return
Eye-Q Auto Converge
What can be done?
The autoconvergence on the current source will be carried out automatically, starting from the existing settings.
By projecting alternately red and blue lines, 25 convergence areas are aligned onto the green pattern.
How to start up the EYE-Q Auto Converge?
1 Push the cursor keys or to select 'EYE-Q Auto Converge' (menu 1).
2 Press ENTER to activate the autoconvergence function.
The process starts and when successfully completed, the projector will return to image display of the
current source.
menu 1
EYE-Q CONTROL
EYE-Q Touch Up
EYE-Q Auto Converge
Select with or
then <ENTER>
<EXIT> to return