Runco DTV-1200 - Manual (Page 45)

GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with or
then <ENTER>
<EXIT> to return
43
Left Side Adjustments
1. Push the cursor key or to highlight the desired correction (menu 1).
2. Press ENTER to start the adjustment.
3. Press EXIT to return when the adjustment is finished.
LEFT SIDE CORRECTION
LEFT KEYSTONE
LEFT BOW
Ensure that the side bow and key-
stone adjustments are done prior to
these fine adjustments!
Select with or
then <ENTER>
<EXIT> to return
Corrects the keystone geometry
distortion of the vertical lines.
Corrects the bow geometry
distortion of the vertical lines.
Top-Bottom (North-South) Adjustments
What can be adjusted?
Top-Bottom and center adjustments affect only the horizontal lines of the projected image. The skew, the bow,
the keystone and the seagull correction can be adjusted.
Start Up
To start up the Top-Bottom and center corrections, follow the next procedure :
1. Push the cursor key or to highlight TOP-BOTTOM (N/S) (menu 1).
2. Press ENTER to select. The Top-Bottom menu will be selected (menu 2).
menu 1
TOP-BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
SEAGULL CORRECTION
Select with or
then <ENTER>
<EXIT> to return menu 2
Correct by pushing the
cursor keys to the right Correct by pushing the
cursor keys to the right