RAD Data comm IPmux-1 - Manual (Page 108)

Appendix E Parameters and Screens IPmux-1/1E Installation and Operation Manual
E-10 General Configuration
The other alarms are not used.
ASCII Terminal Configuration
ASCII TERMINAL CONFIGURATION
1. Display Mode Color
2. Baud Rate (bps) 19200
3. Change Password
4. 15 Min. Timeout On
ESC. Exit
NOTICE: Change the Baud Rate of the ASCII terminal after
changing and saving of new Baud Rate data !
Select item from the menu:_
Use <Esc> key or keys <1> to <4>
Figure E-13. ASCII Terminal Configuration Menu
Table E-6. ASCII Terminal Configuration Parameters
Name Possible Values Remarks
Display Mode Color
MonoChrome 3 color
MonoChrome 2 color
Baud Rate 9600, 19200, 38400, 57600,
115200
– in units of bps
Default: 19200 bps
Change Password Choose this option to enter a menu that allows the
user to change the current password
15 Min. Timeout On, Off On – terminal/Telnet exits to the password screen if
no characters are sent by the terminal for
15 minutes
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
4. ASCII
Terminal Config
Note
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com