RAD Data comm IPmux-1 - Manual (Page 67)

Overview 5-1
Chapter 5
Application Configuration
Procedures
This appendix provides detailed instructions for setting up a test application using
IPmux-1 and IPmux-4. The application can be used as an optional test setup for an
IPmux unit, or can be used as a quick reference guide for basic configuration of an
IPmux unit.
5.1 Overview
Application
The section provides detailed instructions for configuring an IPmux-1 unit opposite
an IPmux-4 unit in a point-to-multipoint application including configuration via a
supervisory terminal (see Figure 5-1).
ETH
ETH
E1
ETH
IPmux-1
E1
PBX
IPmux-1
E1
PBX
IPmux-4
Network Management
Station
PBX
1
1
32
33
IP Network
Figure 5-1. IPmux-1 Operating Opposite IPmux-4
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com