RAD Data comm IPmux-1 - Manual (Page 52)

Chapter 3 Operation IPmux-1/1E Installation and Operation Manual
3-6 Overview of Menu Operations
3.3 Getting Started
After installation, there are no special operating procedures for IPmux-1/1E. Once
it is powered up, the unit operates automatically. The front panel LED indicators
(Figure 3-1 and Figure 3-3) indicate proper operation. The unit operational status
can be monitored constantly.
If required, IPmux-1/1E can be reconfigured. Both the IPmux-1/1E configuration
and monitoring operations are performed locally from an ASCII terminal
connected to the Control port. Detailed configuration procedures are given in
Overview of Menu Operations and Appendix E.
The following functions are supported (see menu trees in Figure 3-5, Figure 3-6,
and Figure 3-7):
• Viewing system information
• Modifying configuration and mode of operation, including setting system
default values
• Viewing statistics and status
• Performing diagnostics.
3.4 Overview of Menu Operations
Navigating
Navigate the IPmux-1/1E terminal menus to set and view configuration
parameters:
• Figure 3-5 maps the IPmux-1 terminal menus
• Figure 3-6 maps the IPmux-1E ISDN-S terminal menus
• Figure 3-7 maps the IPmux-1E FXS terminal menus.
Use these menu trees as a reference aid while performing configuration and
control functions. Appendix E illustrates menus, explains parameters, and lists
default values. Refer to Appendix E to find specific parameters.
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com