RAD Data comm IPmux-1 - Manual (Page 87)

IPmux-1/1E Installation and Operation Manual Appendix A Boot Sequence for Downloading Software
Booting IPmux-1/1E A-3
IPmux-1/1E BOOT MENU
The device can store two software files in its File System.
One is called Operating file and the Second is called Backup file.
Operating file EXIST
Backup file EXIST
Configuration file EXIST
0. Exit
1. File swap: Operating
⇔ ⇔ ⇔ ⇔Backup
2. Download NEW Operating file
(existing Operating file will be saved as Backup)
3. Delete Operating file
(existing Backup file will be saved as Operating)
4. Delete Configuration file
9. Delete ALL FileSystem (Software and Configuration files)
Type in one of the above option numbers (or <ESC> to exit) :
Figure A-2. File System Menu
From the File System menu, you can:
• Exchange the operating and backup files.
• Download a new operating file; the previous operating file is saved as the
backup file.
• Delete the operating file; the backup file becomes the operating file.
• Delete the configuration file.
• Delete all the software and configuration files.
If you choose to exchange or delete a file, you are prompted for confirmation.
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com